|
Detailed Specifications: Serial
Device Servers
LAN Interface: 10/100 BaseT (IEEE 802.3), auto-negotiation. RJ-45
Network connector
Auto
MDI/MDIX and RJ-45 Ethernet connector
Serial Interface: RS-232 (EIA-232), asynchronous DTE configured
with full modem control and hardware flow control; Configurable as RS-232 or RS-422 or RS-485 (RS-232/422/485)
Serial Connectors: Standard DB-9 male for "D" models
(see
connector pinout)
RJ-45 10-pin for "M"
models (see
connector pinout)
Optional Adapters:
SDS-RJ45-10: RJ-45 10-pin adapter
for "D" models, with flying leads for custom configuration
Port-Power:
SSE-100D-5V and DSE-100D-5V provide
+5V at Pin 9 on the DB-9 serial port connector
Serial Ports: SSE: 1 port DSE: 2 ports QSE: 4 ports
ESE: 8 ports
OS Support: Windows NT4/2000/XP/Vista/7 and Linux. Raw TCP, Raw UDP, Tunneling, AutoTCP and and IntelliSock™
modes are OS independent.
Data Rate: 921.6 kbps max per port learn
more about max data rates
UARTs: SSE: 16C550 with 16-byte FIFO
DSE/QSE/ESE: 16C750 with 64-byte
FIFO
Receiver Inputs:
RS-232:
Input Voltage Rating: -15V to +15V
Receiver Skew: 120 ns (typical), 250 ns (maximum)
RS-422/485:
Input Voltage Rating: -15V to +15V Common Mode
Input Voltage
Receiver Skew: 13 ns (typical)
Transmitter Outputs:
RS-232:
High Level Output: +5V (minimum), +5.4V (typical)
Low Level Output: -5V (minimum), -5.4V (typical)
Transmitter Skew: 50 ns (typical), 200 ns (maximum)
RS-422/485:
Transmitter Outputs: 2V min for 100 Ohm load
Transmitter Skew: 5 ns (typical), 10 ns (maximum)
Distance: 4000 feet
Parity, Stop bits:
Parity Configurable as: None, Even, Odd
Data Bits Configurable as: 5, 6, 7, 8
Stop Bits Configurable as: 1, 1.5, 2
Surge Suppression: Surge suppressor applied to each line that
is capable of sustaining up to 40A peak, 8 x 20µs transient surges,
a clamping voltage of 30V and a peak energy dissipation of 0.1 Joules.
(NOTE: The "SS" option limits data rate to 115.2 kbps due to
capacitive loading). Standard on 100D-5V models, optional on all other
models.
Hardware:
Processor: Freescale™ PowerPC®
SDRAM: 8 MB
FLASH Memory: 2 MB
Firmware stored in FLASH may be upgraded via
LAN interface
Protocols and Software:
Management Protocols: UDP, TCP/IP, HTTP, DHCP,
ARP, SNMP
IP Configuration Methods: DHCP or Static IP
set through Installation Wizard, or custom UDP datagram utility (with
command line interface) for unattended installations
Quatech Utilities:
* Windows Device
Manager (Quatech Device Manager in Windows NT)
* On-board HTML
pages accessible from a standard web browser
* Simple Network
Management Protocol (SNMP)
* Intellisock™
TCP socket services
Communication modes: Normal, Tunneling, Raw
TCP, Auto TCP, Raw UDP, Intellisock TCP socket services
Power Supply:
+5V, 2A (10 W) max DC, with auto-sensing AC adapter provided for 100VAC-240VAC, 50Hz-60Hz worldwide operation
Environment:
Operating: 0°C to 70°C
Storage: -40°C to 70°C
Humidity: 10% to 90% non-condensing
Dimensions:
SSE/DSE:
Height: 1.18”
(2.99 cm)
Width: 3.33”
(8.46 cm)
Depth: 4.69”
(11.91 cm)
QSE:
Height: 1.35”
(3.43 cm)
Width: 9.96”
(25.30 cm)
Depth: 4.69”
(11.91 cm)
ESE:
Height: 1.96”
(4.97 cm)
Width: 9.96”
(25.30 cm)
Depth: 4.69”
(11.91 cm)
Certifications: CE, FCC Class B, RoHS and WEEE compliant
Sales Information:
|
